LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid (CANADA) V6-2.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Chain >> Service and Repair >> Crankshaft Sprocket Installation

Crankshaft Sprocket Installation

INSTALLATION - CRANKSHAFT SPROCKET





1. Install crankshaft sprocket using Special Tools 6780-1 and 8179 (Fig. 124) until sprocket bottoms against crankshaft step flange. Use care not to rotate crankshaft.





2. Verify that crankshaft sprocket is installed to proper depth by measuring from sprocket outer face to end of crankshaft (Fig. 125). Measurement should read: 39.05 ± 0.50 mm (1.5374 ± 0.020 inch).
3. Install primary timing chain.

scientia non olet · About LEMON Manuals