Brake Shoes &/Or Pads: Remove & Replace
WARNING: This page is about the Concorde LX, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Both Sides,Front | 1.0 | B | ||
| Both Sides,Rear | 1.0 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed Brake System. | ||||
| Each Additional | 0.2 | B | ||
| One,w/ABS | 0.7 | B | ||
| One,w/o ABS | 0.3 | B | ||
| Combination Procedure: CALIPER: Overhaul: Includes: Bleed Brake System. | ||||
| One,Front or Rear | 0.9 | B | ||
| Combination Procedure: CALIPER: Replace: Includes: Bleed Brake System. | ||||
| One,Front or Rear | 0.3 | B | ||
| Combination Procedure: PARKING BRAKE SHOE & LINING: Replace: | ||||
| Both Sides | 0.6 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: | ||||
| One Side,Rear | 0.3 | B | ||