LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems - Except Coupe >> Removal & Installation >> Curtain (Head Impact) Air Bag Module >> Removal & Installation Sebring, Stratus Sedan

Removal & Installation Sebring, Stratus Sedan

  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Remove headliner. See HEADLINER  .
  2. Remove air bag front tether retaining bolt located at instrument panel on A-pillar. Remove 5 short air bag retaining bolts along roof line. Remove 4 long air bag retaining bolts along roof line and C-pillar. Remove all push-style retainers and discard. Disconnect air bag electrical connector and remove curtain air bag. See Figure .
  3. To install, reverse removal procedure. Tighten air bag retaining bolts to specification. See TORQUE SPECIFICATIONS  . DO NOT connect negative battery cable at this time. Perform air bag system check. See AIR BAG SYSTEM CHECK  under SYSTEM OPERATION CHECK.