LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems - Except Coupe >> Adjustments >> CLOCKSPRING Centering

CLOCKSPRING Centering

CAUTION: Clockspring failure is possible. If rotating part of clockspring is not positioned properly with steering column and front wheels, rotating tape inside clockspring may be damaged and clockspring failure may result. The following procedure must be used to center clockspring.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Place front wheels in straight-ahead position.
  2. Using appropriate plastic tool, depress clockspring locking pin to disengage lock mechanism. Rotate clockspring rotor in clockwise direction until rotor stops. DO NOT apply excessive force.
  3. From the end of its travel, rotate rotor 3 full turns in counterclockwise direction. Wires should end up at top of clockspring. Install steering wheel. Tighten steering wheel retaining bolt to specification. See TORQUE SPECIFICATIONS  . Install air bag module. DO NOT connect negative battery cable at this time. Perform air bag system check. See AIR BAG SYSTEM CHECK  under SYSTEM OPERATION CHECK.
scientia non olet · About LEMON Manuals