LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual HVAC Systems - Except Coupe >> Diagnostic Tests >> Test G: Blend Door Input Shorted To Battery >> Monitor & Set Conditions

Monitor & Set Conditions

DTC is monitored with engine running. BCM reads signal from HVAC control panel for blend request signal and positions blend door accordingly. DTC will set if voltage reading on blend request signal circuit exceeds 90% of ignition voltage. When DTC is set, BCM will place blend door in default position.

scientia non olet · About LEMON Manuals