LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual HVAC Systems - Except Coupe >> Diagnostic Tests >> Test F: Blend Door Input Open/Shorted To Ground >> Monitor & Set Conditions

Monitor & Set Conditions

DTC is monitored with engine running. BCM reads signal from HVAC control panel for blend request signal and positions blend door accordingly. DTC will set if voltage reading on this circuit less than 0.1 volt. When DTC is set, BCM will place blend door in a default position.

scientia non olet · About LEMON Manuals