Road Test

WARNING: This page is about a different variant/trim than selected.

Ensure fluid level and condition are okay. Add fluid if necessary. Road test vehicle, and ensure shift points are at specified vehicle speeds. See Fig 1 -Fig 4 .
If shift points are not as specified, check for DTCs. If slippage occurs, determine which components are applied in each gear. See CLUTCH & BRAKE APPLICATIONS under TROUBLE SHOOTING. Perform hydraulic pressure test to check transaxle internal components. See HYDRAULIC PRESSURE TESTS .

Fig 1: Identifying Transaxle Upshift Points (F4A42)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Transaxle Downshift Points (F4A42)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Identifying Transaxle Upshift Points (F4A51)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Identifying Transaxle Downshift Points (F4A51)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.