LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Diagnosis - F4A42 & F4A51 Automatic Transmission) >> Description & Operation >> Fail-Safe Mode

Fail-Safe Mode

WARNING: This page is about a different variant/trim than selected.
NOTE: Transaxle will enter fail-safe mode when certain DTCs are set. See SELF-DIAGNOSTIC SYSTEM  .

Electronic control system incorporates a fail-safe system in the event that an electronic component should malfunction. Fail-safe system will control transaxle operation until the malfunction is repaired. If failures exist in certain electronic components and is detected 4 times, transaxle may remain in 2nd or 3rd gear. This is referred to as "fail-safe mode". Park, Neutral and Reverse gears will operate in fail-safe mode, but only one forward gear will operate.

scientia non olet · About LEMON Manuals