LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission (Service Information)) >> Lubrication >> Draining & Refilling >> NVT350/A-578 Transaxle

NVT350/A-578 Transaxle

WARNING: This page is about a different variant/trim than selected.
  1. Ensure vehicle is parked on level surface. Remove transaxle drain plug. Transaxle drain plug is located on lower right side of transaxle differential housing. Allow fluid to drain from transaxle.
  2. Reinstall transaxle drain plug and tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Remove transaxle fill plug. Transaxle fill plug is located on left side of transaxle, above axle shaft opening. Fill transaxle with appropriate fluid until fluid is within 3/16" from bottom of transaxle fill plug hole. See RECOMMENDED FLUID  . Install and tighten transaxle fill plug to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals