LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch) >> Overhaul >> Clutch Master Cylinder >> Disassembly

Clutch Master Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove push rod assembly and dust boot. Remove piston stopper ring, and remove piston assembly from cylinder body. DO NOT disassemble piston assembly. Remove spring pin, and remove fluid reservoir nipple and seal. On models equipped with 3.0L engine, remove damper assembly and gasket.

scientia non olet · About LEMON Manuals