LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.4L DOHC Engine) >> Removal & Installation >> Radiator Fan >> Installation

Radiator Fan: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the radiator fan into position on the radiator.
  2. Install the upper and right side radiator fan retaining screws and tighten to 6 N.m (55 in. lbs.).
  3. Raise vehicle and install the remaining fan attaching screws. Tighten to 6 N.m (55 in. lbs.).
  4. Connect radiator fan electrical connector.
  5. Lower vehicle and install the upper radiator hose to radiator. Align hose and position clamp so it will not interfere with the engine or the hood.
  6. Install upper radiator support crossmember and grill.
  7. Install battery tray and battery.
  8. Connect cables to battery.
  9. Fill cooling system.
scientia non olet · About LEMON Manuals