LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.4L DOHC Engine) >> Removal & Installation >> Intake Manifold >> Removal (Caravan, PT Cruiser & Voyager - Lower Manifold)

Removal (Caravan, PT Cruiser & Voyager - Lower Manifold)

WARNING: This page is about a different variant/trim than selected.
  1. Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect negative battery cable. Remove upper intake manifold. Disconnect Inlet Air Temperature (IAT) sensor. Disconnect fuel supply line quick-connect at fuel tube assembly.
  2. Drain cooling system. Remove heater, and upper radiator hoses at intake manifold. Disconnect coolant temperature sensor. Remove accessory drive belt. Remove generator bracket-to-cylinder head and block bolts.
  3. Remove lower intake manifold center support bracket ("Y" bracket) bolts. Disconnect fuel injector harness. Remove lower intake manifold nuts and lower intake manifold. Clean and inspect lower intake manifold.
scientia non olet · About LEMON Manuals