LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.4L DOHC Engine) >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.

Remove timing belt. See TIMING BELT . Using Sprocket Puller (6793) and Puller Insert (C4685), remove crankshaft sprocket. Using Seal Puller (6771), remove front oil seal. Ensure front cover remains undamaged.

CAUTION: DO NOT damage seal surface of shaft or seal bore.
scientia non olet · About LEMON Manuals