LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.4L DOHC Engine) >> Engine Specifications >> Cylinder Block Specifications

Cylinder Block Specifications

WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK

Application In. (mm)
Cylinder Bore
Standard Diameter 3.3446-3.4452 (87.492-87.508)
Maximum Out-Of-Round & Taper .002 (.05)
Maximum Deck Warpage (1) .004 (.10)
(1) Maximum combined total grind limit of cylinder head and cylinder block is .008" (.20 mm).
scientia non olet · About LEMON Manuals