LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Emission Control System - Except Coupe) >> Exhaust Gas RECIRCULATION Valve >> Exhaust Gas RECIRCULATION Tube >> Removal - 4 Cylinder

Removal - 4 Cylinder

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner box.
  3. Remove the EGR tube clamp bolt at intake manifold.
    Fig 1: EGR Tube Clamp
    GC0031919Courtesy of DAIMLERCHRYSLER CORP.
  4. Slide clamp out of the intake manifold slot. See Fig 1.
  5. Remove the 2 bolts from EGR valve.
  6. Remove the tube and gasket. See Fig 2.
    Fig 2: EGR Assembly
    GC0031915Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove the rubber silicone seal from the intake manifold and inspect. See Fig 3. Replace seal if damaged.
Fig 3: EGR Tube Gasket
GC0031916Courtesy of DAIMLERCHRYSLER CORP.