Natural Vac Leak Detection ASSY.: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove fuel tank, refer to REMOVAL .
Disconnect the electrical connector from the NVLD assembly.
Disconnect the hoses from the NVLD assembly. See Fig 2.
Lift tab on NVLD assembly and twist the assembly counterclockwise and pull up to remove from EVAP canister. See Fig 1 and Fig 2.

Fig 1: Locking Tab
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Assembly Removed
Courtesy of DAIMLERCHRYSLER CORP.
Remove O-ring from EVAP canister. See Fig 3.

Fig 3: O-Ring

Courtesy of DAIMLERCHRYSLER CORP.