LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Emission Control System - Except Coupe) >> Air Injection >> Pump >> Installation

Air Injection: Pump: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install air pump to vehicle. See Figure.
  2. Connect quick connect hose to inlet of air pump.
  3. Connect electrical connector. See Figure.
  4. Clip electrical connector to mounting bracket. See Figure.
  5. Install 3 mounting nuts and tighten. See Figure.
  6. Lower vehicle.
  7. Connect quick connect hose to the top of air pump.
  8. Install air inlet tube for the air cleaner box.
  9. Connect negative battery cable.