LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Emission Control System - Except Coupe) >> Air Injection >> One Way Check Valve >> Installation

One Way Check Valve: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the check valve sealing surface on the exhaust manifold.
  2. Install One Way Check Valve with NEW  gasket.
  3. Torque 2 retaining screws to 12 N.m (105 in lbs).
  4. Push connecting tube into check valve.
scientia non olet · About LEMON Manuals