Window Motor: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Install motor on regulator by positioning motor gearbox so that it engages regulator sector teeth. A slight rotational or rocking movement may be necessary to bring the motor gearbox mounting holes into proper position.
- Install the motor fasteners. Tighten to 8 N.m (70 in. lbs.).
- Install regulator. (Refer to BODY/DOOR - FRONT/WINDOW REGULATOR - INSTALLATION) .