Oil Pump: Assembly

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Assemble oil pump as shown in Fig 1.

Fig 1: Oil Pump Assembly

Courtesy of DAIMLERCHRYSLER CORP.

1 - PUMP BODY

2 - OUTER GEAR

3 - INNER GEAR

4 - REACTION SHAFT SUPPORT

5 - SEAL RINGS (4)

6 - REACTION SHAFT

7 - CRESCENT

Install and torque reaction shaft support-to-oil pump housing bolts to 28 N.m (20 ft. lbs.) torque. See Fig 2.

Fig 2: Reaction Support-to-Pump Body Bolts

Courtesy of DAIMLERCHRYSLER CORP.

1 - BOLT (6)

2 - PUMP BODY

3 - REACTION SHAFT SUPPORT