Driving Clutches: Description
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Three hydraulically applied input clutches are used to drive planetary components. The underdrive, overdrive, and reverse clutches are considered input clutches and are contained within the input clutch assembly. See Fig 1. The input clutch assembly also contains:
- Input shaft
- Input hub
- Clutch retainer
- Underdrive piston
- Overdrive/reverse piston
- Overdrive hub
- Underdrive hub
| 1 - INPUT SHAFT |
| 2 - UNDERDRIVE CLUTCH |
| 3 - OVERDRIVE CLUTCH |
| 4 - REVERSE CLUTCH |
| 5 - OVERDRIVE SHAFT |
| 6 - UNDERDRIVE SHAFT |