LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Diagnosis & Overhaul - 41TE Automatic Transmission - Except Coupe) >> 41TE Automatic Transaxle >> Diagnosis And Testing >> Diagnosis And Testing - Hydraulic Pressure Tests >> TEST TWO A-SELECTOR IN OD (4th Gear)

TEST TWO A-SELECTOR IN OD (4th Gear)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks the underdrive clutch hydraulic circuit as well as the shift schedule.
  1. Attach gauge to the underdrive clutch tap.
  2. Move selector lever to the (OD) position.
  3. Allow wheels to rotate freely and increase throttle opening to achieve an indicated speed of 40 mph.
  4. Underdrive clutch pressure should read below 5 psi. If not, then either the solenoid assembly or PCM/TCM is at fault.