LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Diagnosis & Overhaul - 41TE Automatic Transmission - Except Coupe) >> 41TE Automatic Transaxle >> Diagnosis And Testing >> Diagnosis And Testing - Hydraulic Pressure Tests >> TEST FIVE-SELECTOR IN OVERDRIVE (4th Gear-CC on)

TEST FIVE-SELECTOR IN OVERDRIVE (4th Gear-CC on)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach gauge to the torque converter clutch off pressure tap.
  2. Move selector lever to the (OD) position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 50 mph. Vehicle should be in 4th gear, CC on.
    CAUTION: Both wheels must turn at the same speed.
  4. Torque converter clutch off pressure should be less than 5 psi.
  5. This test checks the torque converter clutch hydraulic circuit.
scientia non olet · About LEMON Manuals