Speed Sensor - Input: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery negative cable.

Disconnect input speed sensor connector. See Fig 1.

Fig 1: Transmission Connectors

Courtesy of DAIMLERCHRYSLER CORP.

1 - SOLENOID PACK CONNECTOR

2 - INPUT SPEED SENSOR CONNECTOR

3 - OUTPUT SPEED SENSOR CONNECTOR

4 - TRANSMISSION RANGE SENSOR CONNECTOR

Unscrew and remove input speed sensor. See Fig 2.
Inspect speed sensor o-ring and replace if necessary. See Fig 3.

Fig 2: Input Speed Sensor Location

Courtesy of DAIMLERCHRYSLER CORP.

1 - INPUT SPEED SENSOR

Fig 3: O-Ring Location

Courtesy of DAIMLERCHRYSLER CORP.

1 - INPUT SPEED SENSOR

2 - O-RING