Wiper Motor: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove wiper motor assembly (Refer to ELECTRICAL/WIPERS/WASHERS/WIPER MOTOR ASSEMBLY - REMOVAL) .
- Remove one retaining nut to linkage crank to motor shaft and remove crank.
- Remove the rubber grommet on shaft.
- Remove the three retaining bolts to linkage assembly and remove motor.