LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Wiper System & Washer System - Except Coupe) >> Wiper Motor Assembly >> Removal

Wiper Motor Assembly: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative remote cable.
  2. Remove wiper arms and blades.
  3. Remove the cowl screen.
  4. Remove the two wiper motor assembly mounting screws then lift assembly to gain access to wire harness clip.
  5. Disconnect harness clip from the forward mounting leg.
  6. Disconnect wire connector at motor and remove assembly.
scientia non olet · About LEMON Manuals