LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Wiper System & Washer System - Except Coupe) >> Wiper Linkage >> Removal

Wiper Linkage: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wiper arms and blades.
  2. Remove the cowl screen.
  3. Remove wiper motor assembly.
  4. Disconnect wiper arm linkage by using an ball joint/tie rod separator. Separate the right and left ball cap from the ball.
  5. Disconnect drive link from the motor crank. Using an ball joint/tie rod separator and separate the ball cap from the ball.
scientia non olet · About LEMON Manuals