LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Wiper System & Washer System - Except Coupe) >> Wiper Linkage >> Installation

Wiper Linkage: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the drive link to the motor crank. If motor output crank nut was removed, tighten nut to 25 to 30 N.m (19 to 23 ft. lbs.).
  2. Align link ball cap over ball and gently press fit against shoulder of cap to lock cap into position.
  3. Install the wiper motor assembly.
  4. Install the cowl screen.
  5. Install the wiper arms.
scientia non olet · About LEMON Manuals