Wiper Blades: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Gently lift the wiper arm tip off windshield.
- The driver's side wiper blade has a air foil on it and the air foil points downward.
- Install the blade assembly onto the wiper arm by firmly snapping it onto the arm tip. See Figure and Figure.
- Lower blade to glass
- When complete turn ignition switch ON. Turn wiper switch OFF allowing the wiper blades to PARK. Then turn ignition switch OFF.