LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Wiper System & Washer System - Except Coupe) >> Wiper Arms >> Removal

Wiper Arms: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the wiper arm/blades in the PARK position and turn ignition OFF.
  2. Unsnap nut cover. By hand rock gently side to side and slide away from arm pivot. To remove the left side raise hood for clearance
  3. Loosen retention nut.
  4. Remove the arm from the pivot by using a universal claw puller or by hand rock gently side to side and slide. Raise blade and arm off glass and rock side to side while applying pressure with the puller till loose.
  5. Remove arm retention nut and arm.
scientia non olet · About LEMON Manuals