LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Wiper System & Washer System - Except Coupe) >> Wiper Arms >> Installation

Wiper Arms: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place arm on pivot shaft, align blade with wiper location made on windshield
  2. Start retention nut.
  3. Raise arm and blade off windshield while tightening retention nut. Torque nut to 30 +/- 3 N.m (22 +/- 2 ft. lbs.).
  4. Install arm nut cover.
scientia non olet · About LEMON Manuals