Washer Reservoir Pump: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- A new grommet is required for installation.
- Firmly grasping pump by hand twist and push into reservoir. Care must be taken not to tear grommet or puncture reservoir.
- If fascia was partially removed, reinstall bumper fascia as needed. Refer to INSTALLATION .
- Refill reservoir with the washer solvent.
- Connect the battery negative remote cable.