LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Ignition Control - Except Coupe) >> Ignition Coil >> Removal >> Removal - 2.7L

Removal - 2.7L

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prior to removing the ignition coils, spray compressed air around the coil area and spark plug. See Fig 1.
    Fig 1: Ignition Coils, Coil Capacitor
    GC0031233Courtesy of DAIMLERCHRYSLER CORP.
    1 - Ignition Coils
    2 - Ignition Capacitor
  2. Remove electrical connector from ignition coil.
  3. Remove 2 fasteners from ignition coil assembly.
  4. Remove ignition coil assembly. See Fig 2.
Fig 2: Ignition Coil Removal
GC0031234Courtesy of DAIMLERCHRYSLER CORP.