LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Ignition Control - Except Coupe) >> Ignition Coil >> Removal >> REMOVAL - 4 Cylinder

REMOVAL - 4 Cylinder

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The electronic ignition coil pack attaches directly to the valve cover. See Fig 1.

Fig 1: Ignition Coil 4 Cylinder
GC0031232Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Disconnect electrical connector from coil pack. See Fig 2.
    Fig 2: Ignition Coil Connector
    GC0031231Courtesy of DAIMLERCHRYSLER CORP.
    1 - COIL
    2 - LOCKING TAB
  3. Remove spark plug cables, twist and pull cables to remove.
  4. Remove coil pack mounting bolts.
  5. Remove coil pack.