LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Power Distribution - Except Coupe) >> Junction Block >> Installation

Junction Block: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect BCM to the Junction Block.
  2. Install the BCM to the Junction Block and install the attaching screws.
  3. Install Junction Block/BCM to vehicle.
  4. Connect BCM wire connectors.
  5. Install Junction Block mounting screws.
  6. Connect wire harness connectors to Junction Block.
  7. Install silencer.
  8. Install instrument cluster hood.
  9. Install center bezel.
  10. Install end cap.
  11. Connect battery negative cable.
scientia non olet · About LEMON Manuals