LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Starting System - Except Coupe) >> Starter Motor >> Installation >> Installation - 4 Cylinder

Installation - 4 Cylinder

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect solenoid and B+ wires to starter terminals.
  2. Install nut holding B+ wire to terminal.
  3. Connect solenoid wire connector to terminal
  4. Install starter. See Figure.
  5. Install the upper bolt.
  6. Install the lower bolt.
  7. Install the air cleaner box.
  8. Connect the battery negative cable.