Removal - 2.7L
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Open Hood.
- Disconnect the negative battery cable.
- Raise vehicle and support.
- Remove the accessory drive belt splash shield.
- Loosen the accessory drive belt refer to COOLING - EXCEPT COUPE .
- Remove the lower mounting bolt.
- Lower the vehicle.
- Remove the B+ terminal and field connection. See Fig 1.
- Disconnect the electrical connector to the A/C pressure switch and A/C clutch.
- Remove the engine oil dip stick.
- Remove the 2 upper mounting bolts.
- Remove the generator. See Fig 2.