LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Charging System - Except Coupe) >> Generator >> Installation >> Installation - 4 Cylinder

Installation - 4 Cylinder

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install generator.
  2. Install bolts and tighten.
  3. Install MAP sensor and tighten bolts.
  4. Raise vehicle and support.
  5. Install the accessory drive belt, refer to COOLING - EXCEPT COUPE for more information.
  6. Install the accessory drive splash shield.
  7. Lower vehicle.
  8. Install the B+ terminal wire and nut. See Figure.
  9. Install B+ terminal cover.
  10. Plug in the field circuit to generator.
  11. Install belt cover.
  12. Install the negative battery cable.
scientia non olet · About LEMON Manuals