LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Headlamp Unit - Export -- Except Coupe) >> Headlamp Unit - Export >> Standard Procedure >> Standard Procedure - Headlamp Unit Alignment - Export >> Headlamp Alignment Preparation

Headlamp Alignment Preparation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify headlamps are on low setting.
  2. Verify that the headlamp leveling switch is in the "0" position.
  3. Inspect and correct damaged or defective components that could interfere with proper headlamp alignment.
  4. Verify proper tire inflation.
  5. Clean headlamp lenses.
  6. Verify that luggage area is loaded as the vehicle is routinely used.
  7. Fuel tank should be FULL. Add 2.94 kg (6.5 lbs.) of weight over the fuel tank for each estimated gallon of missing fuel.