LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Battery System - Except Coupe) >> Battery HOLDDOWN >> Removal

Battery HOLDDOWN: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Raise and support the vehicle.
  3. Remove the left front wheel and tire assembly from the vehicle.
  4. Remove battery splash shield. Refer to INTERIOR/EXTERIOR - EXCEPT COUPE for the procedure.
  5. Remove the short bolt from the battery hold down and remove the hold down.
scientia non olet · About LEMON Manuals