LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Battery System - Except Coupe) >> Battery HOLDDOWN >> Installation

Battery HOLDDOWN: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery hold down and install the hold down bolt. Torque to 14 N.m (150 in. lbs.).
  2. Install battery splash shield. Refer to INTERIOR/EXTERIOR - EXCEPT COUPE for the procedure.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals