LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Battery System - Except Coupe) >> Battery Cables >> Installation

Battery Cables: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery cable in the vehicle.
  2. One at a time, install the battery cable retaining pushpins, fasteners and routing clips until the cable is installed exactly in the factory installed location in the vehicle. Refer to appropriate SYSTEM WIRING DIAGRAMS article.
  3. Connect the battery negative cable terminal.
scientia non olet · About LEMON Manuals