LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Weatherstrip/Seals >> Quarter Panel Outer Belt Weatherstrip/Molding >> Removal

Quarter Panel Outer Belt Weatherstrip/Molding: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower convertible top to midway position.
  2. Lower quarter glass to full down position.
  3. Remove quarter trim panel.
  4. Remove screws attaching quarter panel outer belt weatherstrip/molding to outer quarter panel.
  5. Loosen appropriate side of upper deck molding.
  6. Pull upward at one end of outer belt weatherstrip to separate from vehicle.
  7. Remove outer belt weatherstrip from vehicle.
scientia non olet · About LEMON Manuals