LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Weatherstrip/Seals >> Header Weatherstrip Retainer/Molding >> Removal

Header Weatherstrip Retainer/Molding: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Partially raise convertible top.
  2. Remove header and A-pillar weatherstrip as necessary to gain access.
  3. Remove screws attaching A-pillar weatherstrip retainer to header weatherstrip retainer.
  4. Remove screws attaching header weatherstrip retainer to header panel. See Fig 1.
  5. Remove retainer from vehicle.
Fig 1: Header Weatherstrip Retainer
GC0031558Courtesy of DAIMLERCHRYSLER CORP.
1 - HEADER WEATHERSTRIP RETAINER
2 - HEADER
scientia non olet · About LEMON Manuals