LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Weatherstrip/Seals >> Drip Rail Weatherstrip >> Installation

Drip Rail Weatherstrip: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place drip rail weatherstrip into position.
  2. Push drip rail weatherstrip on to the roof rail pinch flange above door openings.
  3. Starting at the bottom of the A-pillar, push the drip rail weatherstrip on to the windshield side molding.
  4. Position splash shield.
  5. Install two screws.
  6. Close front and rear doors.
scientia non olet · About LEMON Manuals