LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Weatherstrip/Seals >> A-Pillar Seal >> Removal

A-Pillar Seal: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open front door.
  2. Using a fork-type tool (C-4829), disengage push-in fasteners attaching A-pillar seal to A-pillar.
  3. Remove A-pillar seal from vehicle.
scientia non olet · About LEMON Manuals