LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Weatherstrip/Seals >> A-Pillar Seal >> Installation

A-Pillar Seal: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place A-pillar seal into position.
  2. Install push-in fasteners attaching A-pillar seal to A-pillar.
  3. Close front door.
scientia non olet · About LEMON Manuals