LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Seats >> Seat Back Latch Striker >> Installation

Seat Back Latch Striker: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Striker is not symmetrical and should be installed with the white date code towards the outside of the vehicle.
  1. Install the seat back striker and install the bolts.
  2. Tighten the bolts to 12 N.m (9 ft. lbs.).
  3. Lock seat back in the up position and check for operation.
scientia non olet · About LEMON Manuals