LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Seats >> Rear Seat Back Cover >> Removal - Jr-27 Only

Removal - Jr-27 Only

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear seat back from vehicle (Refer to BODY/SEATS/REAR SEAT BACK - REMOVAL) .
  2. Place seat back on a suitable work surface in inverted position.
  3. Remove hog rings around perimeter of seat back holding seat back cover to seat back frame.
  4. Pull seat cover from seat back frame and seat back foam.
  5. Remove any hog rings holding seat cover seam wires to seat foam wires.
  6. Remove seat cover from seat frame and seat back foam.
scientia non olet · About LEMON Manuals