LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Interior >> Upper Deck Molding >> Removal

Upper Deck Molding: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower convertible top to midway position.
  2. Remove screws attaching upper deck molding to rear deck panel above convertible top rear attachment.
  3. Open decklid.
  4. Remove screws attaching upper deck molding to rear deck panel inside decklid water trough.
  5. Disconnect wire connector for CHMSL.
  6. Remove upper deck molding from vehicle.
scientia non olet · About LEMON Manuals